Cart total must meet or exceed $49. You must choose Economy Shipping during checkout. Excludes Special Order, Oversized Items, Hobie and Wilderness Systems products
In Stock
Ships Monday if ordered within the next
170-06001/1/20185/28/21087/4/20189/3/201811/22/201812/25/2018
The Wilderness Systems Tarpon SlideTrax Transducer Deployment Arm works in conjunction with the SlideTrax Sideboard and Dashboard to allow easy deployment of your transducer.
Attaches to the SlideTrax Sideboard system on Tarpon and Ride kayaks with SlideTrax
Allows easy deployment of your transducer
No need to drill into your kayak or modify your hull
California's Proposition 65 entitles California consumers to special warnings for products that contain chemicals
known to the state of California to cause cancer and birth defects or other reproductive harm if those products
expose consumers to such chemicals above certain threshold levels. We care about our customers' safety and hope that
the information below helps with your buying decisions.
We are providing the following warning for products linked to this page:
WARNING: This product may contain chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm.
For more information regarding Proposition 65, please visit the California State's website regarding Proposition 65
Here.
Reviews
By: Everett B.Date: Jul 07, 2015
Verified Buyer
Works well with my existing Yak sideboard. The instructions are a
little confusing but I figured it out. This is a great choice over the
through-the-hull or the scupper hole transducer mount options that
are out there. It also keeps everything portable. Lining up and
securing both holes on the sideboard to the Yak rail system now
takes a little more patience with the added weight of the
deployment arm and transducer.
Attached the arm to the
Harmony Mounting plate and
ultimately to my Lorance Elite.
Just finished all the wiring and
will be heading to the Gulf
Coast next week but I think it
will be the answer.
It looks like it might work till you purchase your fish locator.
Then you have to question how do you mount your
transducer to a little arm. Humminbird 386 is what I
purchased ..
Does the trick! Originally
had a 12" extension of PVC
pipe to prevent the transducer
from coming out of the water.
Thanks jlgmd2001 for
commenting on that. Later I
shortened it since 12" was a
tad too long. Overall a
decent product, though I'd
have preferred a generic
plastic block on the bottom to
allow custom fitting of the
various transducer products
out there
Does the trick! Originally
had a 12" extension of PVC
pipe to prevent the transducer
from coming out of the water.
Thanks jlgmd2001 for
commenting on that. Later I
shortened it since 12" was a
tad too long. Overall a
decent product, though I'd
have preferred a generic
plastic block on the bottom to
allow custom fitting of the
various transducer products
out there
Easy to attach transducer and mount to sideboard. Would be nicer if arm had a variable length option, because the transducer comes out of the water with even small waves.
Used the arm to fit Garmon fishfinder to a 120. Worked very well so far, folds back out of the way for transport, and you can still get the yak on top of a car. In use the Garmin benefits from the transducer not being inside the yak, if you fish on the same side as the arm you can see the lead going up and down on the fishfinder! Only gave it four star as fitting the Garmin transducer to the leg required bodging a few washers together.
to reset image
