Cart total must meet or exceed $49. You must choose Economy Shipping during checkout. Excludes Special Order, Oversized Items, Hobie and Wilderness Systems products
In Stock
Ships today if ordered within the next
170-05001/1/20185/28/21087/4/20189/3/201811/22/201812/25/2018
Designed for the Wilderness Systems SlideTrax Rail System, the Universal Mount is a easily installed and can be quickly repositioned when desired. Its flat base is pre-drilled to accept most commonly preferred rod holders and fish finder bases. Can also be drilled for custom applications.
Attaches to the SlideTrax system on the new Wilderness Systems kayaks
California's Proposition 65 entitles California consumers to special warnings for products that contain chemicals
known to the state of California to cause cancer and birth defects or other reproductive harm if those products
expose consumers to such chemicals above certain threshold levels. We care about our customers' safety and hope that
the information below helps with your buying decisions.
We are providing the following warning for products linked to this page:
WARNING: This product may contain chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm.
For more information regarding Proposition 65, please visit the California State's website regarding Proposition 65
Here.
Reviews
By: David LongDate: Jul 27, 2017
Verified Buyer
Great product that allows use of many different manufacturer's gear.
Installed the Mounting plate on
my Wilderness along with the
deployment arm. Easy install
and very sturdy. I haven't
been on the water since the
install but very satisfied with
the design.
This plate mounts a Scotty rod
holder on a Slide Trax as it
is supposed to but it is a
molded hard plastic part that
will likely not last too long
in the sun. Also I dont like
to have rod holders on the
gunnel of my boat as they have
a tendency for the fishing
line to get caught on them.
Perfect fit for the slide trax
on my Tarpon 10. I mounted one
on each side to accomodate
Scotty rodholders. Now all I
have to do while trolling is
to paddle at least until a
bass strikes.
Works great on my Tarpon 10
slide rail. With the Scotty
rodholder attached, it puts my
rod within easy reach and
leaves my hands free to paddle
and troll.
Have two of these on my
Commander 120. One with a
Scott rod holder and the other
with the Scott camera mount.
Very easy to move on the slide
trac to put your accessiories
with in arms reach.
Great shopping experience,
fast delivery. I mounted a
Scotty Rod Holder on the
mounting plate. I can position
it where I want and adjust it
on the fly. Great product
the plate works well with the
slide trac the only
improvement that would make it
better, is if the
brass slides were a little
thinner. it is hard to
slide the plate into the track
because of the screws
in the slidetrack. but other
wise nice.
Definitely fits the bill. Well
designed.
Solid and now with the thumb
screws included ease of
adjustment while on the water.
The only draw back is the
price.
It does what it's supposed to
do, makes a sturdy base for my
rod holder. The design could
be improved by using some sort
of thumb screw to secure it to
the slide track. With the
current phillips screws it
defeats the "slide" ability of
the tracks. It should be about
$10 cheaper as well. This is
no fault of AKC though !!
What you see is what you get. Easy to install, great customer service. One thing they could improve on this plate would be to add some type of hand tightening wing nut or something cool to move the track. I will probably figure something out,it's not rocket science. I will definitely use ACK again.
Excellent product, but has one drawback, instead of
phillips head bolt (Needing screwdriver to move
plate on slide) It should have had something you
could tighten or loosen by hand
This product works just fine but is over priced for what you get. If I had seen it before I bought it, I wouldn't have. You can buy the hardware (plates and screws) and make your own out of wood and save a lot of money. The screws should have been thumb screws so you don't need a screw driver to take it off and on. I have since replaced the screws with thumb screws. I would not recommend this product because you can make your own for a lot less.
Works well. My only issue is that it could be longer so you can use an eyelet screw other or screw that doesn't require tools. There is no room for that.
Q:
What size bolts, nuts, and washers will I need to order to connect the "Harmony SlideTrax Universal Mounting Plate" with the "Scotty Deck Mount Bracket 241"
Q:
Difficult to tell in the photo... Does the plate have nuts on the underside? Is the plate threaded?
I want to be able to put a Scotty rod holder on this; how will it be attached?
A:
There are no nuts on the underside and this plate is not threaded. The 4 holes at ooocornersooo of plate are pre-aligned to accept the mounting holes of the Scotty #241 holder base. The underside of the Universal Plate is milled out to accept hardware and position it so it does not scratch your boat.
to reset image
