Cart total must meet or exceed $49. You must choose Economy Shipping during checkout. Excludes Special Order, Oversized Items, Hobie and Wilderness Systems products
The Native Cam-Lok Paddle Holders are a perfect accessory for your kayak to give you some place to quickly store your paddle when not in use. These cam-lok paddle holders are super quiet and locks on to all paddle shafts and rod ends. They slide into Native Groove Trak accessory tracks and easily lock into the perfect location. They are easy to install and no tools are needed. Sold as a pair.
California's Proposition 65 entitles California consumers to special warnings for products that contain chemicals
known to the state of California to cause cancer and birth defects or other reproductive harm if those products
expose consumers to such chemicals above certain threshold levels. We care about our customers' safety and hope that
the information below helps with your buying decisions.
We are providing the following warning for products linked to this page:
WARNING: This product may contain chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm.
For more information regarding Proposition 65, please visit the California State's website regarding Proposition 65
Here.
I've tried alot of paddle holders over the years and this is by far the best (if you have a native with tracks) . I really like the ability to install, move or reposition them in a few seconds with no tools. Paddles pop in and out effortlessly yet holds them securely. Taking the paddle out is silent and one hand operation as well. Lastly, they double for laying rods/rod tips in while paddling from spot to spot.
Love the way they can be installed, adjusted and removed with no tools. That's a big + on the water. They seem to hold the paddle very wekk to. My only gripe is that they seem big for what they do. I'm concerned thay will be a flyline grabbing feature on the boat now. Time will tell.
They work great on my slayer propel track system. I found if I just
use one I can angle paddle slightly so it doesn't interfere with my ball
mount rod holder on parallel lower track. They grip so nicely that one
holds paddle great.
Warning - This paddle holder will not fit a Feelfree Lure kayak. Due to
the nut on the bottom of the rail connector, it does not set into the
kayak rails. Otherwise, it seems to be a solid purchase for anyone
without a Feelfree.
Overall, product appears sturdy and accepts my paddle without
issue! It is a quality purchase.
My only complaint is that I have an Ascend 10T kayak, and the
Native Cam-Lok itself does not fit in the factory rail as is. However,
from my same order, I happened to receive a Railblaza Starport HD
Trackmount Kit (~$7), and the tracknuts from the Railblaza kit will
replace both the plastic track-guides that come with the Native
Cam-Lok. It is a simple solution that allows you to use the Native
Cam-Lok with your Ascend Kayak!
Great accessory for the Native Watercraft. It keeps the paddle out of
the way and allows access to the rod holder or cup holder while not
interfering with the peddle system.
While not perfect, these Native cam-lock paddle holders are well
made and generally hold the paddle securely on my kayak rail.
Occasionally, when you lift the paddle one of the 2 cam-locks does
not open as the paddle is removed. That causes you to make a
slight adjustment when reinserting the paddle. No big deal!
Without going into detail, I had an incident recently where I
accidentally put excessive force against the cam-locks. Although
my error caused the paddle to pop out of the cam-locks, it did not
damage these tough cam-locks.
I wasn't certain whether or not the Native Cam-Lok Paddle Holders,
Item #13671 would fit the Slidetrax in the Wilderness Systems
Tarpon 120 ACK Angler Kayak, Item#1087.
The "yes" answer to the below questions, "Will this fit wilderness
systems slidetrax" and "Will this work with Tarpon 100 and 120"
influenced my purchase.
Some clarification, however, is necessary.
The Cam-Lok Paddle Holder's base is too thick and will not fit into
the Slidetrax groove. You must purchase the Yak-Gear Universal
Track Nut Kit - 4 pack, Item # 17755.
After substituting the hardware, my Werner Kalliste Carbon Kayak
Paddle Bent Shaft, Item #1444 is secured in place quite nicely.
They look great, work great but just seem to always be in the way. I
need something low profile and I find myself having the paddle on my
legs most of the time anyways. I haven't found good use of them and
the are $$ so I would not recommend this product but they do the job
well.
Someone asked "Will these work with a feelfree lure 10?" They
will if you use the Yak-Gear Universal track Nut kit. These holders
work very well on my Lure!
Along with a rod holder or two, the Native Cam-Lok Paddle Holder is
a must when first rigging a Native kayak for fishing. I have three
slayers and each one has a cam-lok paddle holder. The Cam-lok
queitly stows your paddle when you reach your fishing spot and
keeps it within easy reach. They do come with the hardware (native
brand slugs) for attaching to the track.
Pros: Easy installation, Quiet operation, Price (Yes, really!) I have
bought many Native Brand Accessories and when compared those
accessories with price, value and functionality the Cam-Lok is
money well spent.
Cons: When removing the paddle the rubberized locking part does
not always "pop out" completely, so you must manually open it to
get the paddle back in. While it does work with my bent shaft
paddle, it is a little awkward and noisy--the blades or bent shaft
knock against the kayak depending on configuration. I usually take
out a straight shaft paddle for this reason.
Simple to install and use.
Functional with multiple
placements possible. Secure
paddle holder that does what
it's supposed to do. Price was
good, and delivery on time.
Works as expected. Being
adaptable to the groove
mounting system makes these
paddle holders very
customizable. My only
complaint is that they are
expensive, but I find all of the
Native accessories to be so.
to reset image
