Cart total must meet or exceed $49. You must choose Economy Shipping during checkout. Excludes Special Order, Oversized Items, Hobie and Wilderness Systems products
This item is currently out of stock
Please check back soon while we work on restocking this item!
The BooneDOX Landing Gear Sloped is a kayak wheel system utilizing receptacles that permanently attach to the top of your boat - wheels attach, deploy, and retract without having to tip the kayak over on its side. The Landing Gear uses solid foam wheels, preventing the possibility of ever going flat. Optional Sand Tire Kit sold separately. New for 2019, the Landing Gear just got "Groovy." With the kayak angler in mind, Boonedox has refined their product to include gear grooves on all sides of the receptacles as well as the center link bar, resulting in 70+ inches of track for attaching rod-holders, safety flags, lights, paddle clips, camera mounts, etc. This stronger, lighter, more-rugged design uses anodized aluminum and stainless-steel components to perform in the most strenuous of environments. Rated for 180lbs. Bonafide - This kit is the same as the standard kit except it comes with the UHMW wedge that will go under the knuckle on the top to help level out the knuckles due to the sloped top of the kayak. This kit may also be used with the Hobie Compass in certain installation locations.
Kayak wheel system that attaches, deploys, and retracts without having to tip the kayak on its side
3/8 in. Machined Gear for mounting fishing accessories and accepts Yak Attack and Ram Mounts
Made of aluminum extrusions with stainless steel legs
Solid no-flat wheels and attaches to the hull of the boat. 70+ inches of track
Size/Color
Part Number
BDX-GLGSLP
Specifications
Made in
USA
Videos
More Videos
Landing Gear installation
BooneDox Landing Gear
ACK Basics: How to Install the Boonedox Landing Gear
California's Proposition 65 entitles California consumers to special warnings for products that contain chemicals
known to the state of California to cause cancer and birth defects or other reproductive harm if those products
expose consumers to such chemicals above certain threshold levels. We care about our customers' safety and hope that
the information below helps with your buying decisions.
We are providing the following warning for products linked to this page:
WARNING: This product may contain chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm.
For more information regarding Proposition 65, please visit the California State's website regarding Proposition 65
Here.
Boonedox Groovy Landing Gear Kayak Wheel System Sloped
July 16, 2020
5.0
out of 5
By:
Gary
Date:
July 16, 2020
Recommended Product
I absolutely love my Landing Gear. Getting into the water is as quick as rolling down the ramp and hopping in. Pull the gear out and reinstall them sideways and off you go. I can deploy them in the water before I get to the ramp at the end of the day and simply hop out and pull my kayak up and away immediately. The C-tug wheels it came with are perfect for any hard or packed surfaces, but are woefully inept in loose sand for this heavy of a kayak. I'd recommended getting the beach wheels and legs if you have room to store both styles. I haven't found a set of beach tires that have the correct axel diameter or width to fit the standard legs that this set comes with. Also they WILL NOT FLOAT if you drop them off the side so use the provided bungee cord to keep them secure in either position.
Also, while there is a specific kit for Hobie, I chose this one because I planned on installing the gear further inboard so I could still access the molded-in trays in the gunnels.
Installation on my 2020 Hobie Outback wasn't simple (it was a LOT more work than I was prepared for initially), but there are a bunch of Youtube videos on how to do it using this kit with minimal frustration. Do yourself a favor and also get the Hobie rear hatch and install that at the same time. You'll definitely thank me later.
rv
Verified Buyer
Boonedox Groovy Landing Gear Kayak Wheel System Sloped
June 02, 2012
3.0
out of 5
By:
rv
Date:
June 02, 2012
Recommended Product
Product seem to be made out quality material...time will tell. My wheels are installed on the track system in a Slayer 10. I would not do that again and will probably change to the solid mounts since I lost precious space in the compartment behind the seat. The bar which holds the wheels goes across the compartment.
'Really disappointed in the way the wheel bar has to be inserted into the square tubing. While it is easy on land with two hands , sitting in a kayak, reaching with both hands, and lining up a square hole with a square tube is a bear( a round plastic pilot shaft on the wheel tube would make it a lot easier and wheel assemby would not have to come out of the receiver shaft) . Come on designers, it's not that difficult. As it was, I had to turn around in the seat and wrestle the thing into position. Coming back in from fishing, getting the wheels into the down position is even more fun. The wheels want to float, making the line up process even more fun....and you get to do it for both wheels.
For the money layout I expected better. It just seems like this thing was designed by someone sitting behind a desk. We loaded the kayak and left the wheels on. Oh no, dont do that. The only thing holding the wheels on is a piece of bungee cord with plastic ends!.. Really!
A:
this kit is the same as the standard kit except it comes with the UHMW wedge that will go under the knuckle on the top to help level out the knuckles due to the sloped top of the kayak
Our team makes every effort to respond to questions the same day they are received. If your correspondence is sent in the afternoon or evening, please be aware that a response may not be received until the following business day. If you prefer, relay your question or concern via our live chat feature found in the upper right corner of our websites during our business hours.
Thank you for Answering a QuestionQ & AAnswer a Question
We will review your answer and pass it along to . We may also display your answer for other users. This way if they have the same question, they will have an immediate answer when reviewing our Q & A section. On behalf of and our team, we really appreciate your answer!
to reset image
