Turn your Native watercraft Titan into a a new kayak with the BerleyPro Native Watercraft Titan Steering Conversion. This conversion can be done in 30 minutes and removes the steering stops and allows the rudder to really bite into the water. BerleyPro designed a new drum and rear disc for a new steering cord to run. This cord is now a high speed spectra with an average breaking strength of 290kg (639.341 lb) and is connected by a looped crimp and tied at the rear. The new rear disc gives you the ability to tension the rudder to take the last piece of play from the handle and give you a truly direct steering feel. The increased angle of the rudder also allows you to turn on a dime and the added bonus of aiding in loading and unloading by being able to move it to one side. This fits the following kayaks: Titan 10.5, Titan 12, Titan 13.5
30 minute install
New drum and rear disc for a new steering cord to run
Truly direct steering feel
This fits the following kayaks: Titan 10.5, Titan 12, Titan 13.5
Discounts and/or coupons do not apply to this item
California's Proposition 65 entitles California consumers to special warnings for products that contain chemicals
known to the state of California to cause cancer and birth defects or other reproductive harm if those products
expose consumers to such chemicals above certain threshold levels. We care about our customers' safety and hope that
the information below helps with your buying decisions.
We are providing the following warning for products linked to this page:
WARNING: This product may contain chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm.
For more information regarding Proposition 65, please visit the California State's website regarding Proposition 65
Here.
Great upgrade! Love how it makes the steering feel! Just make sure you retie the knot that’s on the handle, it came untied my second time out and I had to fix it on the water. Also you don’t want to have to adjust it once you tighten it down on the rudder with the screws or it will fray the rope really bad if you have to loosen it up. Other than that I’m happy with it!
A:
This one will not work for your Slayer Propel 10, but here is a link to a conversion kit that will:
https://www.austinkayak.com/BerleyPro-Native-Watercraft-Steering-Conversion/ACK26483P.html
Our team makes every effort to respond to questions the same day they are received. If your correspondence is sent in the afternoon or evening, please be aware that a response may not be received until the following business day. If you prefer, relay your question or concern via our live chat feature found in the upper right corner of our websites during our business hours.
Thank you for Answering a QuestionQ & AAnswer a Question
We will review your answer and pass it along to . We may also display your answer for other users. This way if they have the same question, they will have an immediate answer when reviewing our Q & A section. On behalf of and our team, we really appreciate your answer!