Marine grade black anodized pop rivet. Sold individually. Note: This style of rivet is not designed to break when it is pulled vertically. Depending on your rivet gun, 1 1/2 - 2 1/2 pulls will set the rivet properly. Once the rivet is set, remove the rivet gun and tap the stem laterally (to the side) and it will snap off clean. It is a good idea to practice on some scrap material to get the proper feel.

• Sold individually • 3/16 in. diameter • 1 1/8 in. long from the collar to the tip • Grip range is .125 - to .7 inches

Item#: 268 Length: 1 1/8 in. Repair Brand: All Other Diameter: 3/16 in.

Part Number UPC BHW-WSR

Reviewer:	Richie Giesen	Rating:	4	Date:	05/09/2013
Review:	these work great!

Reviewer:	Brian Motschenbacher	Rating:	5	Date:	04/04/2013
Review:	Very good quality rivet. easy to use.

Reviewer:	Jerry Lester	Rating:	4	Date:	01/15/2013
Review:	Does the job but sometimes the rivet breaks to expose the rivet shank. Other times it does not expose the shank end.
	ACK Reply: This style of rivet is not designed to break when it is pulled vertically. Depending on your rivet gun, 1 1/2 - 2 1/2 pulls will set the rivet properly. Once the rivet is set, remove the rivet gun and tap the stem laterally (to the side) and it will snap off clean. It is a good idea to practice on some scrap material to get the proper feel.

Reviewer:	Michael	Rating:	4	Date:	01/10/2013
Review:	Worked great. I used them to install my flush mount rod holders. Mine broke off a little high and I had to file them down, but I suspect it was because of my rookie rivet installer status. I will buy again if needed.

Install Rivet


Blog Entries
How to Video: Install a Flush Mounted Rod Holder
Flush Mounted Rod Holder Install for the Offshore Angler
Marine Pop Rivets