The the Yakima Rack and Roll 78 in. Cross Member Kit allows you to turn your 66" Rack and Roll trailer into a 78" Rack and Roll trailer. Widen your 66" wheel track and Crossbars by 13" with the Yakima Rack and Roll 78 in. Cross Member Kit. With 78" Crossbars you can carry wider loads, such as two 36-inch beam canoes or up to seven kayaks up on their side.
Click Here to launch fit guide.
This is an awesome kit to widen your rack and roll trailer. The kit comes with 2 66" cross members (pre wired), 2 78" cross bars, 4 end caps for cross bars and a hub cap. My kit came with no instructions so I am making these suggestions from my experience. 1. Disconnect all electrical connections, remove spare tire, license plate and fold up kick stand. Disconnect middle section of trailer. 2. Disconnect one side of trailer, disconnect both cross members, disconnected trailer should be in 3 sections. 3. Connect new 66" cross members to one side of the trailer then to the other. 3. I used a chair to keep trailer from tipping as I connected the middle tongue section. 4. Connect all electrical connections, mount 78" cross bars and mount spare tire. I did this upgrade on my own but it is always good to have some help.