The RAM Transducer Arm Mount with Wedge Base enables the quick and effective deployment and retrieval of your transducer while protecting it from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the arm can quickly be moved to a different kayak and attached to an existing flush mount or 1 in. RAM ball. The unique design provides a universal solution for virtually any kayak as well as any transducer. Wedge is compatible with Scotty bases. Transducer sold separately.
|Eagle||Cuda 250 S/MAP||RAM-B-107-1|
|Eagle||Cuda 250I S/MAP||RAM-B-107-1|
|Eagle||Fishlite 502C IGPS||RAM-B-111|
|Eagle||Fishlite 642C IGPS||RAM-B-111|
|Garmin||Fishfinder 100 Blue||RAM-B-111|
|Garmin||Fishfinder 160 Blue||RAM-B-111|
|Garmin||Fishfinder 240 Blue||RAM-B-111|
|Humminbird||Piranha Max 10||RAM-B-107-1|
|Humminbird||Piranha Max 15||RAM-B-107-1|
|Humminbird||Piranha Max 20||RAM-B-107-1|
|Lowrance||GLOBALMAP 5300C IGPS||RAM-111|
|Lowrance||LMS-527C DF IGPS||RAM-111|
|Lowrance||M52I S GPS||RAM-B-107-1|
|Lowrance||M56 S Map||RAM-B-107-1|
|Lowrance||M56I S Map||RAM-B-107-1|
|Lowrance||M68C S Map||RAM-B-107-1|
|Lowrance||M68C S Map ICEMACHINE||RAM-B-107-1|
|Lowrance||M68I S Map||RAM-B-107-1|
Seems to be a solid project so far. Pros: No Drilling Required Lowance transducer bolted right to it Easy assembly and install Transducer sits below water line but above the bottom of the hull so dont have to worry about it in shallow water Cons: Only fits the small RAM ball mounts The plastic tubing that covers the aluminum rod seems cheap If you bend the rod the wrong way youre screwed
Pretty much useless for my Jackson Kayak. ACk didn't know if it would fit my mount so I called RAM and they assured me it would. Well, it didn't, so I ended up cutting a piece of dowel, sanding it down until the dowel fit, inserting it and drilling a hole and screwing it down . Then I mounted the ram ball on the end ,. Then mounted the shaft and transducer. Works ok, but the ball and mount isn't strong enough to hold the transducer out of the water by itself. Have to pretty much take it off if I am in rough water. Would probably be ok in calm water. ACK was very helpful, but I ended up making my own mount for that works much better.
I'm very happy with the transducer arm, was easy to rig and seemed sturdy, saw little to no play while paddling. I asked for the diamond based ball mount not the wedge base thing when I ordered, not sure how that happened but I re- ordered and received the right one so all is good.
Very happy with it, except that wedge mount thing, wanted the diamond based ball mount, asked for it but received that wedge base thing. Ordered the one I wanted and everything works fine.