New Products From Yak-Gear!

Yak-Gear has come out with a new “Build-A-Crate” milk crate customization product. These are available with either 2 or 3 rod holders and they come with all of the mounting hardware included in the package. The mounting brackets also have slots built into them to hang your knives, pliers, lures and other tools. Get ready to be creative!

Another new product is their Track Nut Kit. This is a universal track nut that easily fits into Wilderness Systems, Native Watercraft, YakAttack and other track systems. This gives you the ability to take any accessory and mount it to whatever boat you would like. For example, do you like your Harmony Universal Slide Trax Mounting Plate but can’t install it on your new Native Slayer? No longer a problem as this handy kit will allow you take your plate off one brand of boat and place it on the other. These come in packs of 4 track nuts, 4 socket head screws, 1 allen wrench, 4 wing knobs that will fit onto the screws (just in case you do not want to use the allen wrench to install every time) and installation instructions.
Jerron @ACK

Kayakers Jon Turk and Erik Boomer – Adventurers of the Year 2012

“My toes still hurt 5 months later.”

A Canoe & Kayak Magazine exclusive featuring Jon and Erik, two paddlers who completed the first circumnavigation of Ellesmere Island, Canada. In this video compilation of dramatic images, Jon and Erik offer additional insight into their experience in this ambitious sea kayak expedition. You can also read more about the adventure on C&K’s website here or on the National Geographic website where both Jon and Erik were acknowledged as “Adventurers of the year 2012″. What an amazing story of feat. Can you spot what kind of kayaks they are using? – Roland @ACK

 

 

Gulf Coast Redfish Fever!

An early fall Redfish round up by Kristian Kolflat

It wasn’t my birthday weekend but it might as well have been! The late summer, early fall seasons provide some of the best redfish fishing here on the Texas coast. So good, that before I can even finish making my plans to hit the coast, I usually come down with a serious bout of “redfish fever” — it’s the only thing on my mind. My last trip was fairly eventful but in an effort to enlighten others with the same experience, I brought along two longtime friends with the hopes of catching some big ones and having a whole lot of fun….and that we did.

Kristian proudly showing his catch for the day

During the fall months, redfish begin to group together into schools for feeding, mating and seasonal movement before winter. Over time, anglers have caught on to this annual “run” and they themselves begin to school into the back bays, flats and jetties along the coastline. Not only is the fishing phenomenal but the beaches tend to be free of seaweed, the water warm and crystal clear, and aside from fellow anglers and paddlers, there are far fewer people in the area. I personally consider this to be one of the best times of the year to be there, so off we were.

Before we left, I had to deal with the fact that my midsize SUV could only hold one or maybe two kayaks at a time but by utilizing a Thule Stacker, I was able to load all three Wilderness Systems Tarpon 120’s with room to spare for one more. We (and our kayaks) arrived safely and it was time to wet our lines.

Day One:
We launched into one of the many back bays with live shrimp and fresh dead menhaden as bait and paddled about a mile and half before reaching the cut, leading to a destination that always proves to hold a few fish. My comrades were impatiently excited and begin to fish before we even get out of the channel. Despite the fact that I am trying to shake off this “redfish fever”, I patiently paddle on a little farther and find a shallow point at the intersection of three waterways. I toss a shrimp under a popping cork and within a few seconds, BAM the fever is broken and I have my first keeper on the stringer!

Kristian and his buddy enjoying another successful day

As the day went on, we split up and explored the bay each on our own, all secretly wishing to find the best fishing hole first. I spotted a small school of reds just under the bow of my yak so decided to quietly drop anchor and cast a few lines out. Glad I did because from this point on, every time my friends looked over my way, my rod was doubled over — this was quite possibly one of the best fishing days I have ever experienced in a kayak. I caught my limit in reds released the rest and even landed a few small trout, a bonnethead shark, a large mullet, skipjack, pin-perch and absolutely no hardheads or stingrays. What more could an angler ask for? A few redfish also made it onto my buddy’s kayaks but before we knew it, the south wind picked up and it was time to head back home.

As I was getting beat in a game of horseshoes on the beach, I wondered if the next day would be as good? No way, not possible. Two awesome days of fishing in a row? Never.

Day Two:
After two seconds of discussion a unanimous vote puts us back in the exact same waters as the previous day. However, as noon rolled around nobody caught anything and our hopes were fading fast. We did see some fellow anglers in the distance catching reds all morning long. No luck for us so we decided it was time to stalk the flats on foot. With my kayak anchored down, I began wading in about four feet of water and threw two lines out. Once again BAM! One doubles over, I set the hook but I miss. I reload, shoot again but this time I’m fighting what I believe is a keeper. The sky brightens, the clouds clear and the fear of going home empty-handed on day two begins to subside. The tide turns and so does the fishing. I turn around to scope out the horizon only to be greeted with two reels zipping away — both mine. I grab one and then the other, set both hooks and perform an awkward dance of holding and alternating between two fighting redfish shooting through the water like bullets. Game on! In the background, my two friends and what seemed like everyone else on the flat is cheering me on like it’s the game of the season and the last shot determines the championship. It turns out that one of the two fish was a half-inch too short so I released her. However, within a few minutes my rod doubled over again and once again, I finished off the day with a full stringer. That night, we enjoyed fresh redfish, fried and blackened at Jay’s Seafood and Spaghetti Works in Port Aransas, Texas.

The trip was over far too quickly and instead of curing my “redfish fever” it simply spiked it even more. So much that I’m considering heading right back down for another weekend of phenomenal fall fishing in Texas soon. If you ever get a chance to visit the area during this time of the year, I high recommend it and be sure to bring your kayak or rent one from one of our stores.

Kristian @ACK Austin

P.S. We couldn’t leave without first walking down the jetties to see what others were catching and knowing that it’s a good time of the year for catching bull reds in the surf. Sure enough, we saw a lot of them being caught. I enjoy keeping a few fish for dinner here and there but these larger reds are not good for eating and are in prime spawning age groups. Here is some age/size information to use before you consider eating that 35-year-old bottom feeding fish that just gave you the fight of a lifetime. Take a picture, throw it back!

Redfish Age and Size*
1 year = up to 15″
2-5 year = 15-29″
6-10 year = 29-38″
11-35 year = 38-44″

*These are rough estimates from a variety of resources. Accurately determining age can be difficult due to habitat, gender, health and a variety of other factors.

Made in the USA

As we approach the July 4th holiday, you can’t help but begin to experience a sense of patriotism with flags being strategically placed at the end caps of grocery store aisles and TV commercials beginning to advertise the inevitable. Seeing all this reminded me about something that Steve, ACK President, mentioned to me sometime back, the fact that we carry a huge selection of products that are either made or assembled in the USA.

Opinions may vary from person to person but from my personal perspective, I feel that our economy is on the road to recovery and can certainly see a glimpse of light at the end of the tunnel. That said, if you’ve ever met me, you know that I would rather talk about kayak fishing, camping or BBQ instead of getting into deep economic and (gasp) political discussions. However, I do want to focus on this topic because I know it is important to both ACK and for that matter, many of our customers. We can certainly appreciate selling low cost goods that contribute to a strong global economy but knowing that a significant percentage of the products we sell are either made or assembled in the USA is something we are extremely proud of. Aside from benefiting from quality craftsmanship, it makes us feel good knowing that by selling products made in this country we are helping contribute to the growth of our own economy, which ultimately helps create jobs locally.

So what are these products we speak of? Well there are over 500 of them but a  few examples that you may be familiar with are boat manufactures such as Hobie Kayaks, Native Watercraft, Ocean Kayak and Wilderness Systems amongst several others. Accessory manufactures are no exception with companies such as Seals SkirtsWerner Paddles, Bending Branches Paddles and Pelican Dry Boxes are also Made in the USA. As you shop at www.AustinKayak.com, you can easily identify those products by looking at the description where you will see “Made in: USA” followed by the American flag.

Now, it’s no secret that while these products are designed, assembled, owned and distributed in the USA, some of the parts that are required to build them may be manufactured in other countries. In some cases, depending on how much of it is made here, it may be labeled as an “Assembled in USA” product as opposed to “Made in USA” as required by law.  Regardless of the terminology, we are happy to continue supporting and promoting products that are benefiting our country’s economy in one way or another.

Roland
ACK HQ

No More Holes! Attaching Kayak Accessories Without Drilling

SlideTrax System

I’ve always noticed that we sell a large number  Wilderness System’s Tarpon series and the Native Manta Ray series kayaks here at the San Marcos store. One of the many reasons these kayaks sell so well, especially among anglers, is their patented accessory attachment systems. These innovations make it easy for paddlers to add and remove accessories by simply mounting them on a pre-installed track or “rail” systems.

For example, in 2009 Wilderness Systems offered the SlideTrax system on the Tarpon 120, 140 and 160.  The concept was new and innovative and over the past two years, it has expanded from simple mounting plates to items such as the SlideTrax Anchor Trolley and Transducer Deployment Arm for fish finders. The SlideTrax rail system now comes standard on the Commander series as well. The SlideTrax system also incorporates tie downs, which can be used to secure items in the tank well.

Groove Accessory Attachment System

In 2010, Native Watercraft announced the Groove Accessory Attachment System. They offer two different sized plates, the rectangular plate (16″ x 5″) and the square plate (6″ x 5″), which can be attached to the Groove System. These plates allow for a wide variety of attachments and as long as an accessory can be attached to the plate with (nuts and bolts) the variations are unlimited. The Groove Accessory Attachment System is now offered on the 2011 Native Ultimate series as well.

These accessory attachment systems are great for paddlers who don’t want to drill holes into the hull of the kayak, are always looking to add new accessories, enjoy a variety of activities that use different equipment and simply want the ability to remove added items for easy transport, storage and cleaning.

I am always interested in seeing how creative paddlers get when utilizing these type of systems. Share your creativity with us.

For more information, come by the store sometime or visit our website at AustinKayak.com and search for “SlideTrax” and “Groove or comment below.

Dave Graves
Assistant Manager
ACK – San Marcos